As time passes, dirt and dust can build up all over the house and form bacteria and germs in the bathroom, kitchen sink, and floor switchboard. A professional switchboard cleaning service in Melbourne can make it quick and perfectly clean for you. But you can also do it yourself if you put in the time and effort. If you leave your switchboard dirty, it will carry many germs and bacteria. The light switch or the electrical cover, can transmit bacteria to your hands. A simple touch on the switchboard is enough for you to get bacteria and become ill.
That’s why we’re here to give you five easy steps for switchboard cleaning by yourself.
What are the things you need?
So here are the things you need to prepare, a tip from professional switchboard cleaning services in Melbourne.
- A flathead or crosshead screwdriver.
- A paintbrush or toothbrush
- Paper towels
- Dry towels
- Scrubbing brush
- Disinfectant spray.
- Liquid soap for washing dishes
What are the 5 steps to clean your switchboard?
Step 1: Follow The Safety Measures
The switchboard is electrical components. It is dangerous if you clean it with a liquid. Therefore, you must follow safety measures to avoid electric shocks during cleaning.
Start by turning off the main power to the house. Remember to clean at the beginning of the day to take advantage of the natural light.
Step 2: Unscrew The Cover of The Switchboard
Simply removing the cover will make the process simple. When unscrewing, keep the screw in a separate box. So you don’t lose it. Now you can clean the cracks and rub off the dirt and stains.
Step 3: Remove The Dust Inside
Dust can collect inside the switchboard through the gap between the cover and the wall.
First, clean and remove the dust inside using a toothbrush or paintbrush. If you cannot remove the dust in a small space, you can use water pressure to clean it.
Only then can you scrub the dirt and stains out of the plastic covers
Step 4: Disinfect The Switch and Electrical Cover
Now create soap solutions or switchboard cleaning solutions by mixing liquid soap in a bowl of warm water.
You can soak the electrical cover inside the switchboard cleaning solution for 10 or 15 minutes.
While the cover is inside the bowl of soaking water. You can disinfect the switch with dry towels dampened with water or with a paper towel. Be very careful not to spray the switcher with water because of the wiring inside
Step 5: Scrub and Dry Everything
Put the scrubbing brush in the switchboard cleaning solution you have prepared. Scrub all the covers after soaking them.
Rinse the switchboard compound under running water and dry it.
Once you are sure that the covers, switches, and everything else is dry, you can screw them on and turn on the main power.
You cannot see the bacteria in your eyes. Regular cleaning of the switchboard is therefore necessary. So now you know the five steps to clean your switchboard. However, if you think it is still complicated or you don’t have time, you can call a professional switchboard cleaning service in Melbourne like us. We are KK Cleaners and offer a wide range of services such as
- windows cleaning
- offices cleaning
- balconies cleaning
- bathrooms cleaning
- BBQ cleaning
- blinds cleaning
- builder cleaning
- carpet cleaning
- office kitchen cleaning
- end-of-lease cleaning
- screen cleaning cleaning
- refrigerator cleaning
- garage cleaning
- kitchen cleaning
- office carpet cleaning
- domestic cleaning
- regulator cleaning
- oven cleaning
- hood cleaning
- carpet steam cleaning
- stove cleaning
- upholstery cleaning
- switchboard Cleaning
For more information, contact us now.