KK Cleaners Logo

How to Clean Kitchen Exhaust Fan In 7 Easy Steps

exhaust fan cleaning service in Melbourne

Your kitchen exhaust fan is very useful to remove fumes, smoke and airborne grease while cooking. You might see that your exhaust fan starts to get greasy. Kitchen exhaust fan cleaning is not difficult. You can do it with a few steps or if you don’t have time, you can still take an exhaust fan cleaning service in Melbourne. By the way, we are here to give you some tips on how to clean your exhaust fan by yourself. Let’s get started now.

1. Remove The Filter

First, remove the power plug from the exhaust fan to protect yourself from electric shock during the cleaning process. 

Then, carefully remove the filter with gloves. The filter is a rectangular part inserted into the exhaust fan. The filter is supported by a lever, which should be pulled gently.  

2. Place it in a Large Container

After removing the filter, place it in a container that is large enough to hold it. 

For example, you can use a plastic bin. The container will be very dirty when you start cleaning the filter. 

3. Prepare a Cleaning Solution

After placing the filter in a container, you can begin to prepare the cleaning solution now. 

Make a mixture of baking soda and dish soap in a large container of water. Bring the mixture to a boil. 

This mixture is very effective in removing grease and is non-toxic. So you don’t have to worry about the mixture damaging the filter.

4. Clean The Filter

Now it’s time to clean the filter by pouring the cleaning solution into the filter container. 

Make sure the filter is completely submerged in the cleaning solution in the container.

Allow the container to sit for 15 to 30 minutes for the solution to dissolve the grease and dirt. 

Then you can begin scrubbing the filter with a bristle brush or sponge to loosen the grease.

Finally, rinse with hot water to remove the residue and cleaning solution. 

5. Let The Air Filter Dry

After the filter is cleaned and rinsed well. Now dry it in the open air by placing it on a towel for 2 hours. 

The filter must be dry and not wet before putting it back in place. This is to avoid electrical problems.

6. Clean Exhaust Fan

By allowing the filter to dry, you can now begin the exhaust fan cleaning process. Use a damp cloth or sponge to remove grease. Avoid putting chemicals on the fan as this can cause electrical malfunctions. 

Be sure to remove the grease from the fan properly to avoid future accumulation and frequent cleaning

7. Reinsert The Filter

Once the grease filter and exhaust fan are clean and dry, you can reassemble them and put them back in place. 

Place the exhaust fan in the same way you removed it. Secure all locks and connect the power supply.

Here are the 7 easy steps to clean your exhaust fan. Carefully follow the advice of the kitchen exhaust fan cleaning professionals to make it clean. 

KK Cleaners offer a wide range of services such as 

  • windows cleaning
  • offices cleaning
  • balconies cleaning
  • bathrooms cleaning
  • BBQ cleaning
  • blinds cleaning
  • builder cleaning
  • carpet cleaning
  • kitchen cleaning
  • end-of-lease cleaning
  • screen cleaning cleaning
  • refrigerator cleaning
  • garage cleaning
  • kitchen cleaning
  • office carper cleaning
  • domestic cleaning
  • regulator cleaning
  • oven cleaning
  • hood cleaning
  • carpet steam cleaning, 
  • stove cleaning
  • upholstery cleaning

For more information, contact us now. 

You May Also Like